Light King Saws Quality HSS Circular Saw Blade

Specifications
HSS Circular Saw Blade
1. High speed steel saw blade
2. Super high speed
3. Low cost and high effection
4. Long lifetime
5. ISO9001: 2000

Material:
A. General material:

A)HSS-DMO5= M2 = DIN 1.3343.

It is molybdenum series, so it has excellent tenacity

B)HSS-DMO5Co= M35 = DIN 1.3243

It contains 5% cobalt. It has excellent wear-resistance

B. Other material:

W9 and W5

Surface Treatment:
ABOUT COATING:
HSS Dmo5 Circular Saw Blade can be coated (PVD or Vapo coating) to improve the performance, increase the life and lowing the cutting time. The most common PVD coating is TiN, TiCN, AlTiN, VAPO COATING )


AlTiN COATING
Suitable for stainless steels, materials with high tensile strength and abrasive materials such as cast iron, silicon aluminum alloys, brass and copper. Due to its low friction coefficient this coating is also suitable for dry-cutting at relatively high cutting speeds


TICN COATING
This is a multi-layer coating with a low friction coefficient that offers an excellent finish at very high cutting and feed rates. It can be used for hard steels (800 1000 N/mm2), for copper and brass alloys and for extremely abrasive materials where the phenomenon of "chip welding" can be a problem.


TIN COATING
Titanium Nitride Coating, it's an excellent PVD coating for protecting saw blade from wear. It is a good choice for iron based materials and cutting condition's requiring resistance to both abrasive and adhesive wear.


VAPO COATING
Vaporized circular saw blade have a surface treatment by applying oxide coating by system. The special advantage are sliding ability and increased absorptive capability for reception of the colling liquid and avoiding the sticking up the material

HSS Dmo5 Circular Saw Blade TOOTH Standard and GEOMETRY

TEETH[A]: Designed for machine work; Such as slotting, with thin saw blade

TEETH [AW]: Designed for machine work; Such as slotting, with thin saw blade.

TEETH [B]: For cutting very thin tubes, which is not necessary to break the chips, so it is suitable for such application.

TEETH [BW]: Be alternatively bevelled, It is most suitable for cutting light gauge steel and sections.

TEETH[C]: Also named HZ, which is most suitable for solid and thick-wall tube cutting. The roughing teeth is bevelled on both sides.

TEETH[BS]: Which is most effective for cutting tube and profile, particularly with PVD Coated blade, it minimises burr formation even at high cutting rates


SIZES: